Rox Speed FX
Rox Anti-Vibration Handlebar Riser
These are a high-tech version of a Rox riser, designed to reduce vibration and decrease hand tingling/numbness. This model has a 2.25" rise, clamps into an oversized 1 1/8" triple clamp, and accepts a 1 1/8" oversized bar. They are very popular for KTM 690 Enduro, Triumph Tiger 800XC, BMW R1200 GS and GSA owners. Great for many other bikes that...
Rox Handlebar Pivoting Riser BMW 800
Low Pro 1¾" center to center rise for BMW F800GS and KTM's. This riser was developed around the F800GS ABS model. Riser barely clears the stock F800GS handlebar clamps and can be pivoted to your desired fore and aft location. Note; we moved our front brake perch inboard on the handlebar 3/8" as well to relieve even more brake line and to insure ...
Rox Pivoting Bar Riser Yamaha Tenere
2" PIVOTING BAR RISERS FOR 2014+ YAMAHA SUPER TENERE These 2" Pivoting Bar Risers are specifically made to fit the angled bar clamps on the 2014+ Yamaha Super Tenére Easy install works without replacing any of the stock cables 2" center-to-center rise Virtually unlimited bar positioning options Made in the USA
Rox Pivoting Bar Riser BMW GS Watercooled
2" PIVOTING BAR RISERS FOR BMW R1200GS/GSA WATERCOOLED These 2" Pivoting Bar Risers are designed to perfectly fit the BMW R1200GS / GSA Watercooled Bikes Easy install works without replacing any of the stock cables Custom made to fit the 1 1/4" Bar on the WC Bike 2" center-to-center rise Includes custom €œLow-Clearance€? caps to replace the OEM ...
Rox Handlebar Pivoting Deluxe Riser
This Rox Riser will fit in any application with 7/8" bars. KLR650, XR650L, V-Strom, BMW 1100 & 1150, Triumph, etc. The "Deluxe" indicates a different shape and look, along with a 4-bolt clamp. Other changes were made to this riser to make it easier to reach your original handlebar clamp bolts. Machined from 6061 T6 aluminum. Always check and...
Rox Elite Pivoting Handlebar Risers
Rox Elite Pivoting Handlebar RisersThese risers raise the position of your bars, and allow you to adjust the position forward or rearward. They slip into your stock 7/8" triple clamp, and you can EITHER use a stock 7/8 diameter handlebar, or you can remove the 7/8 reducers and clamp an 1-1/8 aluminum fatbar. If you are thinking of going to overs...